IC8 REMOTE/UNDERSINK CHILLER REMOTE/UNDERSINK CHILLER with LPA-CS5-10, 5 mic KIT

$849.00

Product Type Cartridge with Kit + Faucet A Cartridge with Kit + Faucet B Cartridge with Kit + Faucet D Cartridge with Kit + Faucet E Cartridge with Kit + Faucet K Cartridge with Kit + Faucet L Cartridge with Kit + Faucet C Cartridge with Kit + Faucet O

Water chiller with filter Kit Australia leading brand Watermark approved product

> Sediment & Carbon Filters (5 Micron):

• LPA-CS5-10 – 5μm carbon block filter with built-in scale inhibitor for added appliance protection.

IC8 REMOTE/UNDERSINK CHILLER REMOTE/UNDERSINK CHILLER

With its 8 litre per hour cooling capacity, the Waterworks™ IC8 is proof that good things come in small packages. Due to the compact design, energy efficiency and quiet operation the IC8 Under-sink chiller is the obvious choice for household applications and offices alike.

SPECIFICATIONS CABINET: The cabinet is a corrosion resistant, high polymer polyester coated steel panel. COLD WATER TANK: 1.7 litre fully insulated, 304 stainless steel tank. The drain plug and seal are removable for servicing.

REFRIGERATION SYSTEM: This fan assisted, static condenser system utilises R134a refrigerant which is non toxic, non-flammable and non ozone depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts. The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed.

INSTALLATION GENERAL: The Waterworks™ lC8 can be installed in small spaces with adequate ventilation, and can be used in conjunction with most inline filter systems. The IC8 must be professionally installed with either a vented tap or with the included kit which contains a pressure reducing valve (PRV), pressure limiting valve (PLV), shutoff valve, stainless steel connectors and a drain clamp.

PLUMBING CONNECTIONS:
Both the inlet and outlet are recessed ¼” stainless steel pipes.
Quick connect stainless steel fittings are included in the above mentioned installation kit.

ELECTRICAL: Certificate number 202240. 220-240v 50hz single phase.
Full load current is .8 amps. 1.5 metre power cord is supplied

INSTALLATION To be installed in accordance with local plumbing laws. Failure to install a certified Pressure Limiting Valve will void warranty.

COOLING PERFORMANCE: 8 litres per hour at 8-10°C Cooling Speed: From 27°C to 8°C in 20 minutes Draw Off Capacity: 8 cups (150ml) below 10°C

WARRANTY The Waterworks™ IC8 under sink chiller is covered by a 3 year comprehensive warranty (copy available on request). The warranty provides comprehensive parts and labour coverage for the period of 3 years from the date of original sale.

Lab Pua LPA-CS5-10 (5um carbon block & Scale inhibitor, 10″L)

SPECIFICATIONS

Service Flow Rate: 1.5 GPM (5.67 L/min)
Rated Capacity: 13,210 Gallons (50,000 L)
Operating Temperature: 4–38℃ (39–100℉)
Pressure Requirements: 10–100 psi (0.7–6.9 bar)
Inlet / Outlet Connection: 3/8″
Electrical Connection: None required
Dimensions:
- Overall: 3.7″ × 12.5″
- Cartridge: Ø3.3″ × 10.7″
Weight: 1.1 kg
Claims:
- Reduces Chlorine, Taste and Odor
- Removes Particulates
- Includes Scale Inhibitor

This all-in-one cartridge inhibits lime scale and reduces unwelcome elements in your water such as sediment, chlorine, bad tastes and odours, as well as providing protection against cysts and
bacteria such as E-coli.

FEATURES · BENEFITS

• Phosphate can prevent to make scale in boiler or heater (phosphate)

• 5micron pore size CTO Block

• Extrusion carbon production method provides stable quality and

• Pre-shield Technology can prevent early clogging and keep the lifespan.

• Replacement method is easy quick-change.

FAUCET A

Reverse Osmosis Water Filter Standard Faucet, Silver non air gap faucet Uses 1/4"

An elegant lead-free European style water filter faucet or Reverse Osmosis system faucet will add a great accent to your kitchen.

It features a smooth quarter turn handle with a ceramic seat for a lifetime of service.

A 1/2-Inch hole is all that is needed for the faucet stud (all series), but a cover plate is included to accommodate larger pre-drilled holes. It is 8.75-Inch tall and has a swivel spout with a reach of 5.5-Inch. for 1/4-Inch tubing.

NOTE: not to be used with RO systems that require an Air gap faucet which has three connections on bottom of faucet.

1.Stylish chrome finish,uses high quality 1/4 turn ceramic valve
2.Finished:Polished Chrome
3.Installation Holes:Single Hole
4.Number of Handles:Single Handle
5.Suitable for 1/4" tubing,standard 10mm diameter stem.
6.The tap comes with all the fittings you need to connect to your sink.

Packing Include:
1 x Faucet,Installation accessories(No tubes)

Notice:
1.Please allow 1-3mm error due to manual measurement,please make sure you do not mind before you bid.
2.The colors may have different as the difference display,please understand.

FAUCET B

Reverse Osmosis Water Filter Standard Faucet, Uses 1/4 inch

WaterMark Model SLC230-1C-AX

Certificate
023066

Model ID
SLC230-1C-AX

Brand Name
Alpine Water Filtration

DtS Installation
Yes

Categories
Water Filters and Water Treatment Appliances

Description
Water Filter Replacement Cartridge Dual Action

Scope of Use
Water Supply

WATER FILTER SYSTEM FAUCET TAP REVERSE OSMOSIS DRINKING WATER TAP

SOLID BRASS DESIGN - DOES NOT CONTAIN LEAD
Requires minimal space so suitable for aLL kitchens, large or small
AS USED IN ALL OUR STANDARD FILTRATION KITS
(Drinking water Faucet only)

· Lead Free Drinking Water Faucet
· Standard non air gap faucet
· water filter faucet Uses 1/4" Supply Tube
· 360 degree free swivel
· Fits all under counter water filter systems

FAUCET C

Ufaucet Modern S/S MATT FINISHED Kitchen Bar Sink Drinking Water

The Designer Full Stainless Steel 304 Water Filter Faucet or Ro system Tap a suitable upgrade from the standard tap
that comes with most water filter kits.
These high-quality Taps are NSF rated.

Perfect attachment for your reverse osmosis or under sink water filter system.

FAUCET D

Drinking Water Filter Tap Chrome Plated faucets round handle

· Premium Ceramic Disc Designer Faucet
· NSF Certified Standard No.61
· Lead-Free RO Drinking Water Dispensing Faucets
· Mounting Dimension Range: 1/2" D to 1-1/4" D Hole

Features

· Ideal for Under Sink Water Filter Or Reverse Osmosis System
· Steel Faucet Tap With Turn Handle
· Dimensions: Height above counter surface = 22cm + spout is 13cm from centre point
· Can be fitted to any water filter system that uses 1/4" tubing [measures 6.35mm]

FAUCET E

FAUCET K

Fin Long Reach Style Designer Water Filter Faucet Tap suitable upgrade from the standard tap.

These high quality Taps are NSF rated.

Made from brass and chrome plated.

Perfect attachment for your reverse osmosis or under sink water filter system.

1/4 turn Ceramic Disc cartridge - Not Spring Loaded

Dimensions: 23.5 H x 15 W cm.

Requires 12mm Hole.

This filter tap has generic connections that enables it to be fitted to most under sink filter systems.

Chrome plated DR brass

• Long reach.
• All chrome.
• ¼ turn lever.
• 2 year warranty

SPECIFICATION

FAUCET K TYPE ( LONG REACH / CHROME 1/2 TURN FINE HANDLE)
MIN/ MAX FLOW 0 - 7.2 LITERS PER MINUTE
MIN/ MAX TEMPERATURE 0-52°C
MIN/ MAX PRESSURE 200-600KPA
CONNECTION 1/4" TUBE
*TAP HOLE 12 MM
WARANTY 2 YEARS
Material Chrome/metal Colour/Chrome
Chrome Plated Tap - To Suit 1/4" Filtration Systems

*
Easy to install with push fit connection
Suitable to use with all undercounter filtration systems
Sturdy brass body construction
Easy to use

FAUCET L

Fin Long Reach Style Designer Water Filter Faucet Tap suitable upgrade from the standard tap.

These high quality Taps are NSF rated.

Made from brass and chrome plated.

Perfect attachment for your reverse osmosis or under sink water filter system.

1/4 turn Ceramic Disc cartridge - Not Spring Loaded

Dimensions: 23.5 H x 15 W cm.

Requires 13mm Hole.

This filter tap has generic connections that enables it to be fitted to most under sink filter systems.

Chrome plated DR brass

• Long reach.
• All chrome.
• ¼ turn lever.
• 1 year warranty`

SPECIFICATION

FAUCET L TYPE ( LONG REACH / CHROME 1/2 TURN FINE HANDLE)
MIN/ MAX FLOW 0 - 7.2 LITERS PER MINUTE
MIN/ MAX TEMPERATURE 0-52°C
MIN/ MAX PRESSURE 200-600KPA
CONNECTION 1/4" TUBE
TAP HOLE 12 MM
WARANTY 2 YEARS
Material Chrome/metal Colour/Chrome
Chrome Plated Tap - To Suit 1/4" Filtration Systems

*
Easy to install with push fit connection
Suitable to use with all undercounter filtration systems
Sturdy brass body construction
Easy to use

FAUCET O

Now you can complement your new kitchen, with the Stefani Black Designer Filter Tap upgrade for under-counter filtration systems. The ultra-modern gooseneck design makes it easy to get drink bottles and kettles underneath the spout.

Having a separate tap ensures anyone can easily access filtered water when you're busy using your mains water tap.

Featuring a spring loaded handle, a sturdy Brass body with a black finish, this tap is the perfect complement to your kitchen water filtration upgrade. ¼” push fit connections make for easy installation.

Watermark approval mark WMTS-103

Stefani Black Replacement Water Filter Tap