Lab Pua Triple purification system for food and beverage water filter 10"
Lab Pua Triple purification system for food and beverage water filter 10″
LPA-SD5-10+LPA-CS5-10 +LPA-MP1S-10
SPECIFICATIONS
|
Service Flow Rate |
1.5GPM (5.67L/min) |
|
Rated Capacity |
6 Months |
|
Operation Temperature |
4~38℃ (39~100℉) |
|
Pressure Requirements |
10~100 psi (0.7~6.9bar) |
|
Inlet / Outlet Connection |
3/8″ |
|
Electrical Connection |
None required |
|
Dimension |
Overall : 3.7″*12.5″ Cartridge : Ø3.3″*10.7″ |
|
Weight |
0.6kg |
|
Claim |
Particle, Dust and Sand, etc |
FEATURES · BENEFITS
• Pretreatment filtration (PP, Melt Blown Type)
• Can remove up to 5micron particles through mechanical method.
• Replacement method is very simple, quick and clean.
LPA CS5 10
Replaces Everpure 2CB5-K EV9617-06 / EV961706 Replacement Filter Cartridge
The Lab Pua LPA-CS5-10 Everpure EV9617-06 / EV961706 Filter Cartridge is intended for food service, vending machine and coffee service applications, and is ideal for problem water areas
Applications
– Ideal for problem water areas
– Foodservice
– Vending
– Office coffee service (OCS)
Installation Tips
– Never use saddle valve for connection
– Use 3/8″ water line
– Install vertically with cartridge hanging down
– Allow 2-1/2″ (6.35 cm) clearance below the cartridge for easy cartridge replacement
– Flush The Lab Pua LPA-CS5-10 cartridge by running water through the filter for five (5) minutes at full flow
Operation Tips
– Change cartridges on a regular six (6) month preventative maintenance program
– Change cartridges when capacity is reached or when pressure falls below 10 psi (0.7 bar)
– Service flow rate must not exceed 1.0 gpm (5.4 Lpm)
– Always flush the filter cartridge at the time of installation and cartridge change
Sizing
Service Flow Rate: Maximum 1.0 gpm (5.4 Lpm)
Capacity: 50,000L
SPECIFICATIONS
|
Service Flow Rate |
1.5GPM (5.67L/min) |
|
Rated Capacity |
13,210 Gallon (50,000L) |
|
Operation Temperature |
4~38℃ (39~100℉) |
|
Pressure Requirements |
10~100 psi (0.7~6.9bar) |
|
Inlet / Outlet Connection |
3/8″ |
|
Electrical Connection |
None required |
|
Dimension |
Overall : 3.7″*12.5″ Cartridge : Ø3.3″*10.7″ |
|
Weight |
1.1kg |
|
Claim |
Chlorine, Taste and Odor, Particulate, Scale Inhibitor |
This all-in-one cartridge inhibits lime scale and reduces unwelcome elements in your water such
as sediment, chlorine, bad tastes and odours, as well as providing protection against cysts and
bacteria such as E-coli.
FEATURES · BENEFITS
• Phosphate can prevent to make scale in boiler or heater (phosphate)
• 5micron pore size CTO Block
• Extrusion carbon production method provides stable quality and
• Pre-shield Technology can prevent early clogging and keep the lifespan.
• Replacement method is easy quick-change.
SPECIFICATIONS
|
Service Flow Rate |
2.1GPM (7.94L/min) |
|
Rated Capacity |
13,210 Gallon (50,000L) |
|
Operation Temperature |
4~38℃ (39~100℉) |
|
Pressure Requirements |
10~100 psi (0.7~6.9bar) |
|
Inlet / Outlet Connection |
3/8″ |
|
Electrical Connection |
None required |
|
Dimension |
Overall : 3.7″*12.5″ Cartridge : Ø3.3″*10.7″ |
|
Weight |
0.95kg |
|
Claim |
Chlorine, Taste and Odor, Particulate, Bacteria & Cyst, Scale Inhibitor |
FEATURES · BENEFITS
• Composite filter is made with carbon and hollow Fiber
• 0.1um pore size can remove bacteria and cyst
• LPA-MP-1-17 has one more carbon block . The carbon block can improve
water taste and odor
• Replacement method is easy quick-change.
• Phosphate can prevent to make scale in boiler or heater (phosphate)
Installation Instruction
1. Turn off main tap water.
2. Rotate the old cartridge counter clockwise ¼ turn and pull it out.
3. Insert the new cartridge into the filter head and rotate clockwise 1/4 turn.
4. Please the cartridge to the vertical position.
5. Turn on the main tap water and check for leaks. If leaks occurs, repeat step 1, 2, 3,4. If leaks persist, discontinue use and call your supporting dealer.
6. Flush filter for 10minutes before use.
Operation Tips
1. For cold water only.
2. Filter should be replaced by each required replacement date.
3. The testing was performed under standard laboratory conditions, actual performance may very.
4. Check for compliance with the state and local laws and regulations.
5. System must be installed and operated in accordance with manufacturer’s recommended procedures and guidelines.
6. Be sure to use the pressure reducing valve, If the water pressure exceeds 4bar.
LAB PUA Carbon Block Filter(CS5&MP1 Series)
LAB PUA MODEL SPEC CHART
LAB PUA TRIPLE-SERIES HEAD
• 43.5cm(W) * 25(H) * 12cm(D)
Lab Pua Installation Guide
Download| Weight | 4 kg |
|---|---|
| Dimensions | 13 × 44 × 35 cm |
| Product Type | Twin Head only, Twin Head + 10" Cartridges LPA-CS5-10 + LPA-MP1S-10 |
Related products
Lab Pua Residential Water Filter LPA-CS5-10 5Micron carbon block & Scale inhibitor
